ATK A9 Grip Tape – Anti-Slip Mouse Sticker for A9 Series

This ATK A9 grip tape is a six-piece precut set cut for the full-size ATK A9 shell. Ultralight mice reward a light, loose hold, yet a smooth shell fights you the moment your hands warm up. Grip tape solves that for a fraction of what a new mouse costs. Moreover, at just 0.5mm thick, this set adds real friction without burying the sculpted shape that made you choose the A9 in the first place.

Cut for the Full-Size ATK A9 Grip Tape Shell

ATK builds its entire A9 range around one symmetrical full-size shape, changing the sensor, switches and weight rather than the shell. Consequently a single set of grip tape fits across the family. This one is cut for the A9, A9 SE, A9 Plus, A9 Pro, A9 Pro Max, A9 Ultra, A9 Ultimate, A9 Ultimate Plus, A9 Ultra Max 2.0 and A9 NB. Because each piece is die-cut to the exact contours of that shell, the edges meet the button seams cleanly instead of overhanging or leaving bare patches.

0.5mm Rubber Polymer Surface

At 0.5mm thick, the rubber polymer surface adds genuine friction without altering the shape underneath. That measurement matters more than it sounds: anything much thicker starts to feel mushy rather than firm, and it rounds off the crisp edges that claw and fingertip grippers rely on. Here the raised texture gives your fingers something to bite into even when your hands get warm mid-match, while the mouse still feels like itself. As a result, lift-offs stay secure and hard flicks do not slide away from you.

Six-Piece Coverage

The sheet holds six precut pieces covering both side rails, both main click buttons and the top and rear shell sections. Therefore every surface your hand actually touches is covered rather than just the sides. The button pieces are thin enough that click feel and travel stay intact, so your left and right clicks respond exactly as they did before. You can also apply only the pieces you want and keep the rest in reserve.

Built for Ultralight Mice

Lightweight mice ask something specific of your hand. Because there is so little mass to anchor the mouse, control comes from friction rather than weight, and any slip translates straight into a missed shot. Grip tape restores that friction without meaningfully adding grams, which keeps the advantage you paid for. In addition, it protects the shell from the wear and shine that builds up on high-contact areas over months of daily play.

Industrial Graphic Print

The black base carries a grey and blue graphic print built from crossed markers, hatched bars, barcode blocks and geometric glyphs. It reads as streetwear rather than standard gaming RGB, which suits a clean minimal desk far better than another dragon decal would. Furthermore, because the print sits within the textured surface rather than on top of it, it does not rub away the way a printed sticker would.

Easy to Apply, Clean to Remove

Installation takes a few minutes. First, wipe the shell clean and let it dry completely, since any oil left behind stops the adhesive bonding properly. Then peel each piece off the backing sheet, line it up against the button seam or shell edge, and press down firmly for about thirty seconds. Work one piece at a time rather than peeling the whole sheet at once. When you want it off later, the tape lifts cleanly, although a little residue can remain and wipes away easily.

What This Set Does Not Fit

Read this before ordering. The set is cut for the full-size A9 shell only. It does not fit the A9 Mini or A9 Mini Plus, which use a smaller body despite sharing the A9 name. It also does not fit ATK’s other model lines such as the F1 or X series, since those are different shapes entirely. If you are unsure which version you own, check the model name on your box or in the ATK Hub software, or send us a message and we will confirm it for you.

Buy ATK A9 Grip Tape in Nepal

Backseat Gaming stocks this grip tape set with delivery across Nepal. If you have not picked up the mouse yet, browse our gaming mice collection and grab both together, or read the full A9 range breakdown on the official ATK A9 series page. You are also welcome to drop by our Balkhu store and have it fitted for you.

Frequently Asked Questions

Which ATK A9 versions does this grip tape fit?

It fits the full-size A9 shell, which covers the A9, A9 SE, A9 Plus, A9 Pro, A9 Pro Max, A9 Ultra, A9 Ultimate, A9 Ultimate Plus, A9 Ultra Max 2.0 and A9 NB. ATK keeps one shape across the range and changes the internals between versions.

Will it fit my A9 Mini?

No. The A9 Mini and A9 Mini Plus use a smaller form factor than the standard A9, so the precut pieces will not line up and will overhang the edges. Check your model name before ordering if you are unsure.

Does grip tape add noticeable weight to an ultralight mouse?

Not meaningfully. At 0.5mm the full set adds only a couple of grams, which is far less than most players can feel. The control you gain from the extra friction outweighs it comfortably on a lightweight shell.

Will it affect how the buttons click?

Barely. The button pieces are thin enough that click travel and tactility stay essentially the same. Most players stop noticing the tape within a day, while the added grip on the sides stays obvious.

Can I remove it later without damaging the shell?

Yes. The pieces peel off in one go. Some light adhesive residue may remain depending on how long it has been applied, and that wipes off with isopropyl alcohol. Note that a removed piece will not stick as firmly if you try to reapply it.

How long does grip tape last?

With daily gaming, expect several months before the texture smooths out in the highest-contact spots. Heavy sweat shortens that while wiping the mouse down regularly extends it. Grip tape is a consumable, so plan on replacing it from time to time.